A-A-551A
TABLE II. Examination for defects
|
Examine |
Defect |
|
Finish |
Area of corrosion, stained or discolored |
|
Construction and workmanship |
Scratch or tool mark on interior surfaces, clearly noticeable 1/ Scratched, pitted, or tool mark on exterior surfaces. Any sharp edge, sliver or burr. Any part missing or not specified size. Any component fractured, split, bent, buckled, punctured or otherwise impaired. Marking missing or illegible. |
|
Handles |
Not securely attached. |
1/- An acceptable scratch is one that will catch a fingernail when run across it.
5. PREPARATION FOR DELIVERY
5.1 Packaging, packing, and marking. The packaging, packing, and marking shall be as specified in the contract or order.
6. NOTES
6.1 Ordering data. Purchasers should select the preferred options permitted herein and include the following information in procurement documents (if applicable).
a. Title, number and date of this commercial item description
b. Size double boiler required (see 1.2)
c. The packaging, packing, and marking desired
6.2 Part Numbering. Double boilers conforming to this commercial item description shall be identified by a part number configuration consisting of identification of a portion of the specification number and size. An example of the part number configuration is shown below. This part numbering system intended for identification and cross-indexing of the item within the Federal cataloging system. Part numbers are not required to be placed on the product or container.
Part Numbering System for Commercial Item Description A-A-551
Example: AA551-1 (AA551-1) Example- Size 1, 4 quart
double boiler
|------------- Size (1, 2, or 3)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business