A-A-859A
3.1.2 Cover. The cover shall be fabricated from a single piece of metal. The cover shall be made from the same material as the body and may be up to 20 percent less in thickness. The cover shall be hinged at the back with two hinges or one piano hinge and shall have a metal hinged hasp at the front. The cover shall be reinforced by folding the edges to form a hem and flattened tightly. The cover shall close over the rim of the body with a hinged hasp fitting over the hasp staple on the body.
3.2 Finish. Aluminum breadbox shall have a white anodized finish and corrosion-resisting steel breadboxes shall have a polished finish.
3.3 NSF International compliance. Prior to approval of first shipment, the contractor shall submit to the contracting officer or his authorized representative satisfactory evidence that the items offered meet the applicable requirements of NSF International Standard No.2. Satisfactory evidence of this compliance may be any of the following:
(1) A Listing in the current edition of the NSF International “Listing of Food Service Equipment” and display of the NSF International mark on the finished item, or
(2) A certification issued by NSF International under this special one-time contract evaluation/certification service or
(3) A certified test report from a recognized independent testing laboratory acceptable to the contracting officer or authorized representative of the service for which the items are being procured, indicating that the item has been tested and conform to NSF International Standard No.2.
3.4 Marking for identification. The manufacturer’s name, trade name, or trademark shall be applied to the breadbox. The breadbox shall be legibly marked with the word “Bread”.
3.5 Workmanship. The finished breadbox shall be clean and smooth and shall not contain any burrs, rough die, tool, gouge, or grind marks. The finished item shall not be fractured, dented, bent, punctured, or malformed. There shall be no defects which may impair serviceability, durability or appearance.
3.6 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as amended, to the maximum extent practicable.
3.7 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within tolerances specified using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this document are met.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business