A-A-1753A
Except as otherwise specified in the contract or order, the use of the contractor’s own or any other facilities suitable for the performance of the inspection requirements specified herein shall be permitted, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
4.3 Sampling. The levels of inspection and acceptable quality levels (AQL’s) shall be in accordance with MIL-STD-105.
4.4 Lot information. All egg poachers from the from the same manufacturer offered for delivery at one time shall be considered a lot for purposes of inspection.
4.5 Sampling for visual and dimensional examination. A random sample of egg poachers shall be selected from each lot in accordance with inspection level S-4, AQL 4.0 expressed in terms of defects per hundred units. The sample units shall be one egg poacher with cover. The sample egg poachers (and covers) shall be visually and dimensionally examined to verify compliance with table I and the remainder of this commercial item description. All dimensions are absolute as defined in ASTM E 29.
Table I. Classification of defects
|
Examine |
Defect |
|
Finish |
Area of Corrosion Stained or discolored |
|
Construction And Workmanship |
Scratch or tool mark on interior surface, clearly noticeable 1/ Scratched, pitted, or tool mark on exterior surfaces Any sharp edge, sliver or burr Any part missing, or not specified size Any component fractured, split, bent, buckled, punctured or otherwise impaired |
|
Marking |
Missing or illegible |
|
Handles |
Not securely attached |
1/ - An unacceptable scratch is one that will catch a fingernail when run across it.
4.6 Examination for preparation for delivery. A random sample of shipping containers shall be selected from each lot for examination of the unit, intermediate and shipping containers (as applicable) for conformance with the preservation, packaging, packing, labeling, and marking required in the contract or order. The samples shall be selected in accordance with inspection level S-2, acceptable quality level (AQL) 6.5, expressed in terms of defects per hundred units.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business