3.2 Marking. The poachers shall be marked with the manufacturer’s name, trade name, or trademark of such known character that the source or may be readily determined.
3.3 Workmanship. The egg poachers shall be clean and free from any cracks, fractures, malforming, scale, pits and flux deposits. The egg poachers shall have no sharp edges, slivers, burrs, deep scratches, tool marks, or other defects which might affect serviceability, durability, or appearance.
3.4 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
3.5 Measurement system. The values stated in inch-pound units are to be regarded as the standard. The values stated in parenthesis are for informational purposes only.
3.6 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within tolerances specified using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the specification preparing activity for changes to this document.
3.7 Commercial item. The use of the term “commercial item description” in this document does not imply that any item or items offered are not required to conform with all requirements specified herein.
4. QUALITY ASSURANCE PROVISIONS
4.1 Contractor certification. The contractor shall certify that the items meets the salient characteristics and the requirements of this commercial item description, and, except for any government unique requirements specified, conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial marketplace, or is the same product has been successfully been delivered to the government on a previous contract or purchase order. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
4.2 Responsibility for inspection. Unless otherwise specified herein the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business