A-A-50071
December 31, 1984
COMMERCIAL ITEM DESCRIPTION
RACKS, FOOD CONTAINER, MOBILE
The General Services Administration has authorized the use of this commercial item description in preference to Type I, Size 2 of Military Specification MIL-R-43567A (GL).
Intended use.
This commercial item description covers two types of mobile racks to be used in military commissaries.
Type I –Two food container (lugs) capacity
Type II – Six food container (lugs) capacity
Salient characteristics.
Description: The type I food container rack shall carry two containers (lugs) measuring 25 inches long by 15 inches wide by 8 inches deep. The rack frame shall be of welded construction of round or square stainless steel tubing. Four 5-inch diameter swivel casters with a 1 inch minimum hard rubber tread shall be provided with the rack. The dimensions of the type I rack shall be 27 inches wide by 20 inches deep by 34 inches high, and the type II rack shall be 27 inches wide by 20 deep by 78 inches high. The racks shall be provided with bumpers so that the component of the rack, except the bumper, touches a vertical wall upon contact.
Test. With each lug loaded with 100 pounds, the rack shall be capable of being pushed ten times over a 1/4 inch high obstacle without evidence of damage or permanent deformation.
Markings: The rack shall have an identification plate installed and it shall include the manufacturer’s model and serial number, contract number and stock number.
Standards compliance: The racks shall comply with National Sanitation Foundation Standards Criteria C-2.
Workmanship.
All workmanship shall conform to good commercial practice.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business