A-A-468A
3.5 Workmanship. The scoop shall be free from sharp edges, slivers, burrs, deep scratches, pits and tool marks. Welding shall be complete, free from burn holes, cracks, fractures, slag inclusion, and undercut. Welds shall be correctly fused, smooth and uniform. There shall be no defects which impair the durability, appearance, or serviceability of the item.
3.6 NSF Compliance. Prior to approval of the first shipment, the contractor shall submit to the contracting officer of his authorized representative satisfactory evidence that the items offered meet the applicable requirements of NSF Standard No.2. Satisfactory evidence of this compliance may be any of the following:
(1) A listing in the current edition of the NSF “Listing of Food Service Equipment” and display of the NSF seal on the finished item, or
(2) A certification issued by NSF under the special one-time contract evaluation/certification service, or
(3) A certified test report from a recognized independent testing laboratory acceptable to the contracting officer or authorized representative of the service for which the items are being procured, indicating that the item has been tested and conforms to NSF No. 2.
3.7 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 as amended to the maximum extent practicable.
3.8 Measurement system. The values stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are for informational purposes only.
3.9 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within tolerances specified using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the specification preparing activity for changes to this document.
3.10 Commercial item. The use of the term “commercial item description” in this document does not imply that any item or items offered are not required to conform with all requirements specified herein.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business