3.3 Workmanship. The measure shall be clean and free from dirt, grease, rough or sharp edges, slivers, burrs, deep scratches, tool marks, or other defects which may affect appearance or serviceability. The measures shall not be fractured, dented, punctured or otherwise malformed or damaged. Welds shall be complete, free from burnholes, cracks, fractures, slag inclusion, and with scale or flux deposits removed. Rivets shall not be missing, broken, fractured, or loose.
3.4 Standard compliance. The measure shall comply with the requirements of NSF International Criteria C-2 or Standard No. 2.
3.5 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within tolerances specified and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch – pound unit, a request should be made to the contracting officer to determine if the product is acceptable.
3.6 Standard commercial product. The measures shall, as a minimum, be in accordance with the requirements of this CID and shall be the manufacturer’s standard commercial product. A standard commercial product is a product which has been sold or is currently offered for sale on the commercial market through advertisement, manufacturer’s catalogs, or brochures, and represents the latest production model.
4. REGULATORY REQUIREMENTS
4.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS
5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer’s own drawings, specifications, standards, and quality assurance practices and be the same products offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business