A-A-2534A
Copies of Federal standards are available from the General Services Administration Business Service Centers in Boston, MA; New York, NY; Philadelphia, PA; Washington, DC; Atlanta, GA; Chicago, IL; Kansas City, MO; Fort Worth, TX; Denver, CO; San Francisco, CA; Los Angeles. CA: and Seattle, WA. and the GSA Specifications Unit (3FBP-W), Suite 8100, 476 E. L’Enfant Plaza; S.W., Washington, DC 20407.
Military Standard:
MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes.
Copies of military standards may be obtained from Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia PA 19111-5094.
ASTM Standard:
E29- Standard Practice For Using Significant Digits In Test Data To Determine Conformance With Specifications.
Application for copies of ASTM standards should be addressed to ASTM, 1916 Race Street, Philadelphia, PA 19103.
3. SALIENT CHARACTERISTICS
3.1 Design and construction. The griddle shall be cast iron and rectangular in shape with lifting handles centered on each end. The griddle, exclusive of the handles, shall be 21 inches (533.4 mm) plus or minus 1-1/4 inches (31.8 mm) in length by 10-1/2 inches (266.7 mm) plus or minus 1 inch (25.4 mm) in width. The top and bottom surfaces shall be parallel, and shall have continuous, uniform raised edges above and below the surfaces. At the option of the supplier, reinforcing ribs may be provided on the bottom surface. The thickness of the griddle shall be not less than 1/8 inch (3.2 mm). The griddle plate shall have a minimum weight of 10 pounds (4.5 kg).
3.2 Workmanship. The griddle shall be clean, free of imbedded foreign material, pits, blow holes, porosity, cracks, chips, fractures, fissures, and deformities. The finished griddle shall be free of rust, burrs, and sharp edges. Handles shall be smooth and free of rough surfaces and any other defects that may cause injury.
3.3 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as amended, to the maximum extent practicable.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business