A-A-1953A
The sample peeler shall be visually and dimensionally examined to verify compliance with table I and the remainder of this commercial item description. All dimensions are absolute as defined in ASTM E 29.
TABLE I. Classification of defects
|
Examine |
Defect |
|
Finish |
Area of corrosion, stain or discoloration Not as specified |
|
Construction and Workmanship |
Scratch or tool mark 1/ Any sharp edge (except for cutting edge, sliver, rough tool or die mark, or burr) Any component fractured, split, bent, buckled, punctured, or otherwise impaired |
1/ - An acceptable scratch is one that will catch a fingernail when run across it.
4.6 examination for preparation for delivery. A random sample of shipping containers shall be selected from each lot for examination of the unit, intermediate, and shipping containers (as applicable) for conformance with the packaging, packing, and marking required in the contract or order. Samples shall be selected in accordance with inspection level S-2, AQL 6.5 (dhu).
5. PREPARATION FOR DELIVERY
5.1 Packaging, packing, and marking. The packaging, packing, and marking shall be as specified in the contract or order.
6. NOTES
6.1 Ordering data. Purchasers should include the following information in procurement documents (if applicable).
a. Title, number, and date of this commercial item description.
b. The packaging, packing, and marking required.
6.2 National Stock Number. The following NSN corresponds to this cid: 7330-00-238-8316.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business